How To Install A 2 Meter Ant In 99 Ford Ranger Pickup Truck
In this post one can know how to install a 2 meter ant in 99 ford ranger pickup truck. With the help of these instructions, one can do installation of an antenna on his Ford Ranger Pickup Truck on his/her own.
Procedure to Install 2 Meter Ant In 99 Ford Ranger Pickup Truck
The radio should be removed, and you need to loosen the plug associated with the antenna that is situated at the back of the radio.
Tie a six feet cord or a bailey twine or a similar kind of wire to the plug end and attach it with the tape. Try to loosen screws that are fixed to the plate, where these plates hold the antenna. Try to get the antenna wire out till you get six inches of the cord.
Fixing the New Antenna
On the new antenna, tie the cord to the plug and attach with a tape. Now, reach your vehicle and try to remove the drag the cord until you can get the plug. Draw the plug and try to plug into the radio. Radio must be re installed inside the vehicle.
Insert the remaining wire into the hole and re-insert the screws back to the plate that holds the antenna. The antenna can also be held with the help of a nut, which is beneath the fender. Finally, you have to loosen the wheel liner to obtain better results.